FS: JRSC/GSR,p28,Mugen Lowdowns,HKS,JDM 4-1,Gauges, ITR Sway
02-13-2005 | 12:21 AM
#1
Thread Starter
~~ Hardcore Newb ~~
Joined: Feb 2005
Posts: 33
From: Toronto
Rep Power: 721 
FS: JRSC/GSR,p28,Mugen Lowdowns,HKS,JDM 4-1,Gauges, ITR Sway
Jackson Racing Supercharger w/6psi pulley. Never been boosted more than 6psi.
Previous owner used for 25K and I used for 40K. I've had no issues what so ever with the charger. In perfect working condition.
As for the fuel system I'm throwing in DSM 450 injectors with obd1 clips and resistor box.
Also throwing in 4 new NGK BKR7Es 2 step colder plugs
3 gates JRSC belts and a gates Alternator belt. I bought 4 belts because I heard they snap and what not.. but after 40,000kms I never had to replace the belt once. It's good to keep one in the car just in case.
Hondata intake manifold gasket reusable .. lowers intake temperatures.
Bunch of hoses that you'll need, all the bolts and screws .. some extra rubber o-rings.
All the manuals that I've used printed that you'll need to install it yourself.
$1600
P28 ecu, socketed and ready for chip .... $150
** Header Back **
OEM Honda JDM 4-1 Headers. No Scratches or dents 2.5" Collector
Tapped on #3 runner for EGT gauge.
High Flow Cat (4 Months Old)
HKS Dragger Catback (high-luster polished, straight-through Catback)
(specs: 106mm 4" Tip with 60mm 2.36" piping)
One of the quietest exhausts on the market. My engine was louder than the exhaust.
Looking to sell together since it is all flanged and ready to bolt up.
I'll part out only if nobody wishes to buy the whole system. It'll save somebody money in not having to reflange everything for different applications.
$850
Gauges
Autometer Sport Comp Boost Gauge with hose and light ......$50
Autometer Sport Comp EGT with Probe .....$150
Autometer Dual Gauge Cluster (I don't know what other cars this will fit sorry.. please research) .....$70
Mugen Lowdowns for ITR or any integra but will need ITR LCAs 5 way adjustable.
Original buyer used for 6000kms ......$1200
ITR 22mm rear Sway Bar with D-Links,end-links, and my own custom mounting Kit (I've used this bar with my home made kit for 3yrs without any issues)..... $75
Located in Scarborough
Please email me at boostedgsr8@hotmail.com
Whoever shows up with cash first will get what they want. I will not hold anything. Thanks.
Previous owner used for 25K and I used for 40K. I've had no issues what so ever with the charger. In perfect working condition.
As for the fuel system I'm throwing in DSM 450 injectors with obd1 clips and resistor box.
Also throwing in 4 new NGK BKR7Es 2 step colder plugs
3 gates JRSC belts and a gates Alternator belt. I bought 4 belts because I heard they snap and what not.. but after 40,000kms I never had to replace the belt once. It's good to keep one in the car just in case.
Hondata intake manifold gasket reusable .. lowers intake temperatures.
Bunch of hoses that you'll need, all the bolts and screws .. some extra rubber o-rings.
All the manuals that I've used printed that you'll need to install it yourself.
$1600
P28 ecu, socketed and ready for chip .... $150
** Header Back **
OEM Honda JDM 4-1 Headers. No Scratches or dents 2.5" Collector
Tapped on #3 runner for EGT gauge.
High Flow Cat (4 Months Old)
HKS Dragger Catback (high-luster polished, straight-through Catback)
(specs: 106mm 4" Tip with 60mm 2.36" piping)
One of the quietest exhausts on the market. My engine was louder than the exhaust.
Looking to sell together since it is all flanged and ready to bolt up.
I'll part out only if nobody wishes to buy the whole system. It'll save somebody money in not having to reflange everything for different applications.
$850
Gauges
Autometer Sport Comp Boost Gauge with hose and light ......$50
Autometer Sport Comp EGT with Probe .....$150
Autometer Dual Gauge Cluster (I don't know what other cars this will fit sorry.. please research) .....$70
Mugen Lowdowns for ITR or any integra but will need ITR LCAs 5 way adjustable.
Original buyer used for 6000kms ......$1200
ITR 22mm rear Sway Bar with D-Links,end-links, and my own custom mounting Kit (I've used this bar with my home made kit for 3yrs without any issues)..... $75
Located in Scarborough
Please email me at boostedgsr8@hotmail.com
Whoever shows up with cash first will get what they want. I will not hold anything. Thanks.
02-13-2005 | 10:18 PM
#2
Thread Starter
~~ Hardcore Newb ~~
Joined: Feb 2005
Posts: 33
From: Toronto
Rep Power: 721
To answer all the pms and emails:
All my parts off a 98 Acura Integra.. I don't know if the exhaust will fit any other car other than an Integra.
The bung on the header can be pluged up, it's a threaded hole so you can use a bolt or something to plug it up. Napa or a mechanic garage can probably find something..
The header should fit any B series motor. Sorry, I don't have the heat shield.
I havn't decided on parting out the header yet. I'll post up a price when I decide to.. I'd rather sell it together if possible.
The JRSC will only fit on a GSR head. The bolt pattern for the IM on the GSR is different than that of a b16 or a b18c5.
All my parts off a 98 Acura Integra.. I don't know if the exhaust will fit any other car other than an Integra.
The bung on the header can be pluged up, it's a threaded hole so you can use a bolt or something to plug it up. Napa or a mechanic garage can probably find something..
The header should fit any B series motor. Sorry, I don't have the heat shield.
I havn't decided on parting out the header yet. I'll post up a price when I decide to.. I'd rather sell it together if possible.
The JRSC will only fit on a GSR head. The bolt pattern for the IM on the GSR is different than that of a b16 or a b18c5.
03-02-2005 | 08:19 PM
#12
Thread Starter
~~ Hardcore Newb ~~
Joined: Feb 2005
Posts: 33
From: Toronto
Rep Power: 721
Jackson Racing Supercharger w/6psi pulley. $SOLD
P28 ecu, socketed and ready for chip .... $SOLD
** Header Back **
OEM Honda JDM 4-1 Headers. No Scratches or dents 2.5" Collector, Tapped on #3 runner for EGT gauge.
High Flow Cat (4 Months Old)
HKS Dragger Catback (high-luster polished, straight-through Catback)
(specs: 106mm 4" Tip with 60mm 2.36" piping)
Looking to sell together since it is all flanged and ready to bolt up.
One of the quietest exhausts on the market. My engine was louder than the exhaust.
I'll part out only if nobody wishes to buy the whole system. It'll save somebody money in not having to reflange everything for different applications.
Header Sold.
$500 for Cat Back
Gauges
Autometer Sport Comp Boost Gauge with hose and light ......$SOLD
Autometer Sport Comp EGT with Probe .....$150
Autometer Dual Gauge Cluster (I don't know what other cars this will fit sorry.. please research) .....$70
Mugen Lowdowns for ITR or any integra but will need ITR LCAs 5 way adjustable.
Original buyer used for 6000kms ......$1200
ITR 22mm rear Sway Bar with D-Links,end-links, and my own custom mounting Kit (I've used this bar with my home made kit for 3yrs without any issues)..... $SOLD
Sorry.. Can't seem to edit the post. My webhost went down so here's the updated post with the images again.
Header is SOLD.
P28 ecu, socketed and ready for chip .... $SOLD
** Header Back **
OEM Honda JDM 4-1 Headers. No Scratches or dents 2.5" Collector, Tapped on #3 runner for EGT gauge.
High Flow Cat (4 Months Old)
HKS Dragger Catback (high-luster polished, straight-through Catback)
(specs: 106mm 4" Tip with 60mm 2.36" piping)
Looking to sell together since it is all flanged and ready to bolt up.
One of the quietest exhausts on the market. My engine was louder than the exhaust.
I'll part out only if nobody wishes to buy the whole system. It'll save somebody money in not having to reflange everything for different applications.
Header Sold.
$500 for Cat Back
Gauges
Autometer Sport Comp Boost Gauge with hose and light ......$SOLD
Autometer Sport Comp EGT with Probe .....$150
Autometer Dual Gauge Cluster (I don't know what other cars this will fit sorry.. please research) .....$70
Mugen Lowdowns for ITR or any integra but will need ITR LCAs 5 way adjustable.
Original buyer used for 6000kms ......$1200
ITR 22mm rear Sway Bar with D-Links,end-links, and my own custom mounting Kit (I've used this bar with my home made kit for 3yrs without any issues)..... $SOLD
Sorry.. Can't seem to edit the post. My webhost went down so here's the updated post with the images again.
Header is SOLD.
