Car Parts For Sale Car parts of all sorts for sale. Import, domestic, NOS, turbo kits, seats etc.

FS: GSR Front & Rear Brake Conversion

Thread Tools
 
Search this Thread
 
Old 04-27-2006 | 02:23 PM
  #1  
Hatch2k's Avatar
Thread Starter
Average GTcars Poster
iTrader: (1)
 
Joined: Feb 2005
Posts: 437
Rep Power: 728
Hatch2k street rep is low. keep going
FS: GSR Front & Rear Brake Conversion

Okay, I'm playing with the idea of going 5 lug so my (non-ABS) GSR 4 lug setup is for sale. Here's what's included:

Front Spindles
Rear Trailing Arms with Energy Suspension Bushings
KVR Front & Rear Cross Drilled Rotors
KVR Front & Rear Carbon Fiber Brake Pads
Calipers, hubs, etc.
e-Brake cables for 92-00 Civic/Integra

I purchased the entire setup from a friend of mine and was installed on my car in October. The rotors and pads had a summer of driving on them (approx. 10,000kms) and when everything was installed, I replaced the 2 rear calipers with freshly rebuilt ones.

I rode on this setup until the beginning of December when the car went into storage (approx. 3000kms of use). After that, the car was just rolled around the shop until the end of February. In March I installed Wilwood big brakes in the front and AEM big brakes in the rear so the KVR rotors and front pads have not been really used since December. Everything else was driven approx. 2000kms.

All in all, the conversion is in excellent condition. All bearings turn smoothly, all calipers work great, and the pads/rotors have alot of life left in them (no scoring, ridges, grooves, etc.).

I'm looking to get $600 for the setup and I can throw in a set of stainless steel braided brake lines for an extra $75.

This may seem like alot, but consider a KVR rotor & pad setup would run you about $400-440 brand new, I spent $200 on the rear calipers, etc. I've dealt with quite a few brake conversions now and they usually come with worn out pads/rotors, seized calipers, and/or worn bearings... a really big headache.

This is all still installed on my car at the moment, so if you're interested in going for a spin to test out the bearings, you're more than welcome to.

I am including everything needed to convert your 92-00 Civic/Del Sol to 4 wheel disc.

If you're interested, please PM or e-mail me at vince at heishin.ca. I am located in Richmond Hill, thanks.
Old 04-27-2006 | 02:56 PM
  #2  
CRXITR's Avatar
~~ Hardcore Newb ~~
iTrader: (3)
 
Joined: Jun 2005
Posts: 68
Rep Power: 708
CRXITR street rep is low. keep going
I need to sell this item http://www.gtcars.ca/online/showthread.php?t=24265 before I can consider picking this kit off you... Sounds like a really good deal...

Hey, I just noticed this post http://www.gtcars.ca/online/showthre...ota+slipstream do you still have the 4x100 rims laying around? cause if you do i'm interested...

Best of luck with the sale bro

Last edited by CRXITR; 04-27-2006 at 03:19 PM.
Old 04-27-2006 | 03:34 PM
  #3  
Hatch2k's Avatar
Thread Starter
Average GTcars Poster
iTrader: (1)
 
Joined: Feb 2005
Posts: 437
Rep Power: 728
Hatch2k street rep is low. keep going
Thanks for the bump, good luck with the sale of your Slips

Sorry, I do not have the 4x100 Slipstreams anymore, that was a very old post.
Old 04-28-2006 | 03:46 PM
  #4  
Hatch2k's Avatar
Thread Starter
Average GTcars Poster
iTrader: (1)
 
Joined: Feb 2005
Posts: 437
Rep Power: 728
Hatch2k street rep is low. keep going
Bump!
Old 04-30-2006 | 08:07 PM
  #5  
Hatch2k's Avatar
Thread Starter
Average GTcars Poster
iTrader: (1)
 
Joined: Feb 2005
Posts: 437
Rep Power: 728
Hatch2k street rep is low. keep going
Ttt...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jdmh22
Car Parts For Sale
1
04-16-2009 04:53 PM
djtelx
Cars For Sale
16
09-01-2007 02:14 AM
playa69
Car Parts For Sale
2
08-10-2007 07:41 AM
civictyper
Car Parts For Sale
0
07-05-2007 10:12 AM
mugenEG
Want To Buy
0
02-15-2005 08:32 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: FS: GSR Front & Rear Brake Conversion



All times are GMT -4. The time now is 02:27 PM.

Page generated in 0.08615 seconds with 6 queries