Rep Power: 719

Ok, Please look below, prices are pretty cheap but feel free to make me an offer if you think something is too high. Offers where you will pick up will be looked at more seriously, I live in Whitby not far from the 401, if not I can meet up for the Toronto people, I usually can come out from Whitby to Kennedy Commons.

Ractive coilover sleeves for 88-00 civic, I used them for 1 year, I bought them of someone, $40



Below in the pics you have:

'86 Accord front Shocks, when used in a 88-91 civic/crx, these shocks lower the car 1.5" without loosing any travel since they are shorter then the stock ones. they are the Monroe Sensitrac from crap tire used for 1 year. I used them with the above coil overs and the coilovers were fully pre-loaded and the car had 1 finger wheel gap, also much better this way since you can have the preload, makes for a better ride. $50

Prothane D series mount inserts (Comes with 2 of the inserts already in mounts from a SOHC ZC for tranny and drivers side, others need to use stock mount, very easy to do) $20

Dropzone replica of Ingalls front and also have Rear camber kits. these were for a 88-95 civic as per the e-bay add. These are essential for a lowered civic these are 0-3 degrees. The allignment shop was able to dial in perfect factory camber settings with these. They are in great shape! Would rather sell them as a set $80





15" rims, not sure what type of rim they are, but they are 15x7's, the tires are Federal SS535 tires that were bought in June, so like 85-90% tread left on the tires. The rims are just painted the bronze color with duplicolor paint, they are not powder coated. I can give whoever buys them the can of paint and clear incase it chips and they want to touch up. These are not hubcentric for honda's but it works fine on the civic when you are careful in putting the lugs on them. Would like $400







I have 3 Audi 5000 FMIC cores. 2 are VERY clean and ready to weld up, 1 is pretty dirty. For the clean ones, $40 for the dirty one $30 I can weld up some end tanks, but it would be $100 each one I make and paid in advance, or at least have the money in advance because it would all be custom made and that takes a lot of time.

Dirty core (no longer has those end tanks)



2 clean cores



I have other stuff I'm sure I just can't think of it right now. Best way to get a hold of me is PM, or e-mail jerome.michaud@gmail.com

thanks!

Jay

 
Rep Power: 719

I forgot to mention that the tires are 195-50-15

 
Rep Power: 719

Edited tire size.

 
Rep Power: 719

Willing to Trade for turbo parts, looking for 14b or T3 in good shape, DSM injectors, etc. I already have an intercooler and a DSM BOV

 
Rep Power: 719

Dropzone Camber kits sold

 
Rep Power: 719

Ractive coilover sleeves for 88-00 civic SOLD


Price Drop on rims, $350

 
Rep Power: 719

bump!