built K24 motor/Sidewinder Turbo Kit
#1
built K24 motor/Sidewinder Turbo Kit
Complete stage 5 K-series Turbo Kit
K-Series Sidewinder Manifold
Tial 44mm Wastgate
stainless Wastegate DumpTube, With V Band Clamps
custom Air/Air Intercooler 31 X 11.75 X 4"
Aluminum intercooler Piping & flange for Bov
All Intercooler Piping Couplers, and T Bolt Clamps and Vacume lines
Tial 50mm Blow Off Valve
Precision Billet 6262 Turbo With all oil fittings & Vband.
-10AN black braided Oil Return Line
-3 Oil Feed line with Block and Turbo Fitting's & heat wrap tape.
Stainless 3 inch down pipe with V Band Clamps
Boost Controller
Everything like new with no short corners taken, everything in perfect working condition. came out of a DC.
* Injectors not included*
$3000
The motor was built by Gram @ canadian cylinder head. Was built for track purposes, only got around to making a few passes on it. yielding a personal best of mailto:10.68@141 w/ a 1.88 60". Tuned at 27 psi made 600whp 430tqe. Motor is still in the car and runs perfectly. Only Royal Purple oil changes. can provide buyer with a tune as well if needed.
Built K24/K20 Motor
k20a2 head
k24a2 Long Block
crower rods(800 hp) w/ Arp rod bolts
cp pistons 9:1 compression
Fully blueprinted and Balanced Crank
Arp Rod Bolts
ARP Main Studs
Arp Head Studs
ACL Race Bearings
Cometic Head Gasket
rbc intake manifold + hondata gasket
k20a2 Tb + all sensors
Karcepts TB adapter
Ep3 Idle Pully
K20a2 Cams
SuperTech Valve Springs
SuperTech Retainers
Ferrera Valves
k20a2 oil pan
k20a2 oil pump
k20a2 oil pan tapped with -10an
all new seals, timing chain, guides, tenshioner , 87.5m bore etc.
$4000
Ep3 Tranny with WaveTrac LSD
$1000
text 416-727-7879
K-Series Sidewinder Manifold
Tial 44mm Wastgate
stainless Wastegate DumpTube, With V Band Clamps
custom Air/Air Intercooler 31 X 11.75 X 4"
Aluminum intercooler Piping & flange for Bov
All Intercooler Piping Couplers, and T Bolt Clamps and Vacume lines
Tial 50mm Blow Off Valve
Precision Billet 6262 Turbo With all oil fittings & Vband.
-10AN black braided Oil Return Line
-3 Oil Feed line with Block and Turbo Fitting's & heat wrap tape.
Stainless 3 inch down pipe with V Band Clamps
Boost Controller
Everything like new with no short corners taken, everything in perfect working condition. came out of a DC.
* Injectors not included*
$3000
The motor was built by Gram @ canadian cylinder head. Was built for track purposes, only got around to making a few passes on it. yielding a personal best of mailto:10.68@141 w/ a 1.88 60". Tuned at 27 psi made 600whp 430tqe. Motor is still in the car and runs perfectly. Only Royal Purple oil changes. can provide buyer with a tune as well if needed.
Built K24/K20 Motor
k20a2 head
k24a2 Long Block
crower rods(800 hp) w/ Arp rod bolts
cp pistons 9:1 compression
Fully blueprinted and Balanced Crank
Arp Rod Bolts
ARP Main Studs
Arp Head Studs
ACL Race Bearings
Cometic Head Gasket
rbc intake manifold + hondata gasket
k20a2 Tb + all sensors
Karcepts TB adapter
Ep3 Idle Pully
K20a2 Cams
SuperTech Valve Springs
SuperTech Retainers
Ferrera Valves
k20a2 oil pan
k20a2 oil pump
k20a2 oil pan tapped with -10an
all new seals, timing chain, guides, tenshioner , 87.5m bore etc.
$4000
Ep3 Tranny with WaveTrac LSD
$1000
text 416-727-7879
Thread
Thread Starter
Forum
Replies
Last Post
flipflop
Car Parts For Sale
2
11-24-2009 11:32 PM
turbojizer
Car Parts For Sale
4
06-10-2007 09:02 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)