Rep Power: 708

Here's the V-Flag:
http://img.photobucket.com/albums/v132/digi01/VFLAG.jpg

Here's where I'm thinking of putting it(Red Circle):
http://img.photobucket.com/albums/v1...placement1.jpg

Here's what I've already done to each fender:
http://img.photobucket.com/albums/v1...1/IMG_3189.jpg

Any other suggestions as to where else I might put it? I'm not sure if putting it on the front would be too much.

Thanks.

-Marc

EDIT: Links should be fixed now

If not, I'm thinking of putting it above the regular camaro emblem in the front nose.

 
Rep Power: 878

The last 2 links dont work

 
Rep Power: 1069

just link from photobucket, teh bottom line of code on teh site copy and paste it

 
Rep Power: 708

How about if I just took the stock emblem off and replaced it with the V-Flag? I could either fill the indented area in somehow, or I could Create an indent to fit the V-flag. But how would I do that?

 
Rep Power: 1069

really those should go in front of the tire,or under your camaro emblem, on the nose tehy would look funny because of their size

 
Rep Power: 708

but it's not big. It's about 3.5 X 2.7. I'm not even sure that its bigger than the stock emblem, minus the wings. But thanks for your input, I might consider that.

 
Rep Power: 990

if you're gonna put it on the front, take off the original emblem, fill the indent, and put it there.

 
Rep Power: 707

I have these emblems on my car as well. Tho the previous owner is the one who originally placed them on the car. Here is a picture where you can see where the emblems were placed.

 
Rep Power: 708

Great car! The flags look good there. Thanks for all the suggestions. Though I don't know how yet, I'm going to remove the stock emblem, fill-in the indent, and replace it with the V-flag. My second choice would be to put it on the grill in place of the bow-tie, but I'd have to bend the emblem, and 'm pretty sure it would break. Thanks again everyone.

 
Rep Power: 0

Place them in the trash or the car they originally belonged on.

 
Rep Power: 708

No thanks, I think I'll throw away that useless comment instead. I'm just trying to make my Camaro unique. But I guess I'll thank you for being honest.

 
Rep Power: 1069

before going through all the work on teh fron, use some scotch tape and tape it over top the stock emblem and make sure you like teh look

 
Rep Power: 809

From what I can see your script Camaro lettering on the side is far enough over that you could put the flag right beside that... Because, doesnt the front cure enought that you will have to bend it in some way or is it flat? I know on my car I would have to bend it because I have the newer front, and it has a curve right down the middle..

 
Rep Power: 708

That might be the easiest thing to do. I placed them where the original Camaro script was, so yes, there is clearance.

 
Rep Power: 1069

next to it may make it look too long use the tape and see where it looks best to you