FS: NEW Kicker 12L7 Subwoofer, Kicker12L7 in Kicker Box, enclosures
#1
FS: NEW Kicker 12L7 Subwoofer, Kicker12L7 in Kicker Box, enclosures
Kicker's VS12L7 Enclosure with Pre-Loaded Solobaric L7 12" Subwoofer
This is a very high quality Kicker Built Vented/Ported Enclosure pre-loaded with a Kicker 2005 Model 12L7 Dual 4 ohm Subwoofer.
This setup was used for 1 month, and hits VERY hard & clean, harder than many dual subwoofer setups.
Kicker Solobaric L7 12L7D4 Subwoofer - NEW IN BOX
This is a Kicker Certified Factory Refurbished Subwoofer which is NEW in box.
Refurbished simply means that all of the major components (voicecoil, cone, spider assembly, etc) were replaced except for the non-moving basket/magnet, so that you essentially get a BRAND NEW subwoofer.
If you know about about Kicker's Solobaric L Series Subwoofers, you know that they hit harder than most of the competition, because of the square cone, which allows for more cone area and in turn pushes more air.
Specifications:
Kicker Solobaric Vented Single 12" Enclosure
Here is a high quality vented enclosure that I built for another Kicker Solobaric subwoofer that I used to own. It is designed to maximize the efficiency of your Kicker 12" Solobaric subwoofer
Specifications:
Custom Dual 12" Vented Enclosure
This is a custom Ported Subwoofer Enclosure. It is built extremely strong, and it is really solid. It was used to enclose 2 JL Audio 12W4's, and they hit VERY hard and low in this enclosure.
Specifications:
Asking $40.00 or $45.00 with speaker terminals. Local buyers only in the GTA.
Please contact me via PM function or email me at paradigm905@hotmail.com if you wish to purchase any of the above items. All sales final.
This is a very high quality Kicker Built Vented/Ported Enclosure pre-loaded with a Kicker 2005 Model 12L7 Dual 4 ohm Subwoofer.
This setup was used for 1 month, and hits VERY hard & clean, harder than many dual subwoofer setups.
- Rugged Vented Enclosure
- 29"Wide x 14-5/8"High x 12-1/2"Deep (at top) to 18-3/4"Deep (at bottom)
- 3/4" Medium Density Fiberboard coated with rough-textured, black catalyzed polyurethane & carpeted enclosure with decorative cast aluminum pieces
- Stylish Cast Aluminum Grille
- frequency response 24-100 Hz
- recommended power range 75-750 watts RMS
- peak power handling 1,500 watts
- Dual 4 ohm Voice Coils
- Wired in Parallel to present 2 ohm mono load
Kicker Solobaric L7 12L7D4 Subwoofer - NEW IN BOX
This is a Kicker Certified Factory Refurbished Subwoofer which is NEW in box.
Refurbished simply means that all of the major components (voicecoil, cone, spider assembly, etc) were replaced except for the non-moving basket/magnet, so that you essentially get a BRAND NEW subwoofer.
If you know about about Kicker's Solobaric L Series Subwoofers, you know that they hit harder than most of the competition, because of the square cone, which allows for more cone area and in turn pushes more air.
Specifications:
- 750 watts RMS Power Handling
- 1500 Watts Peak Power Handling
- Dual 4 Ohm Voice Coils
- 12" Diamater Square Cone (much more surface area than a convential circle cone)
- Heavy-duty nickel-plated terminals and sleeved lead wires
- Sensitivity: 87.4dB
- Sealed box volume: 0.88-2.00 cubic feet
- Ported box volume: 1.75-3.25 cu. ft
Kicker Solobaric Vented Single 12" Enclosure
Here is a high quality vented enclosure that I built for another Kicker Solobaric subwoofer that I used to own. It is designed to maximize the efficiency of your Kicker 12" Solobaric subwoofer
Specifications:
- For use with all Kicker 12" Solobaric Subwoofers
- Tuned to 38hz
- 16.25" deep x 31" wide x 14.5" high
- 12.75" x 3" slot port area
- 3/4" MDF Wood used all around
- All joints sealed with silicone
- Used many screws & wood glue
- Fully Carpeted
- Includes 2 sets of Terminal Cups to wire both voice coils direct to amp (or you can use just one if you wish)
Custom Dual 12" Vented Enclosure
This is a custom Ported Subwoofer Enclosure. It is built extremely strong, and it is really solid. It was used to enclose 2 JL Audio 12W4's, and they hit VERY hard and low in this enclosure.
Specifications:
- Tuned to 36hz
- 19.75" deep x 34.75" wide x 14.5" high
- Ported Design
- 4.4 Cubic foot total size
- 2.2 Cubic foot per chamber
- 3/4" MDF construction
- 3/4" MDF center divider
- 1 port per chamber (3"wide x 5.5" long)
- Carpet is wearing at the corners
Asking $40.00 or $45.00 with speaker terminals. Local buyers only in the GTA.
Please contact me via PM function or email me at paradigm905@hotmail.com if you wish to purchase any of the above items. All sales final.
Thread
Thread Starter
Forum
Replies
Last Post
buzzelli
Car Audio & Electronics
4
03-19-2008 03:06 PM
Azxster
Car Audio For Sale
3
07-19-2007 11:35 AM
kingrukus
Car Audio For Sale
3
07-14-2007 11:34 AM
buzzelli
Car Audio & Electronics
0
04-26-2007 07:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)