Car Audio & Electronics car audio discussion on such things as kicker, rockford fosgate, orion, ppi. need to know how to install an amp, heres the place.

radio stays on

Thread Tools
 
Search this Thread
 
Old 01-13-2007 | 07:35 PM
  #1  
crx_90's Avatar
Thread Starter
~~ Hardcore Newb ~~
iTrader: (1)
 
Joined: Mar 2005
Posts: 142
Rep Power: 719
crx_90 street rep is low. keep going
radio stays on

sup guys i was wondering y my deck stays on even after i take the key out
this is really annoying does anyone know and can i fix this
thaxx

plus i dunno which is the ignition switch on the car
its a 90 jetta
if someone can get me a diagram thatwould be geat

Last edited by crx_90; 01-13-2007 at 07:39 PM. Reason: Automerged Doublepost
Old 01-13-2007 | 08:15 PM
  #2  
JordyO's Avatar
~~ Hardcore Newb ~~
 
Joined: Feb 2006
Posts: 148
From: Ottawa
Rep Power: 687
JordyO street rep is low. keep going
That's exactly your problem.... your HU's wire that requires a switched input (from your ignition) is getting constant power.

Did you use a wiring harness when you installed the radio?

I don't have a wiring diagram but you could always find one with a test light.
Old 01-15-2007 | 07:44 PM
  #3  
Sanj's Avatar
~~ Hardcore Newb ~~
 
Joined: Apr 2005
Posts: 28
Rep Power: 715
Sanj street rep is low. keep going
If ur radio worked fine before, but not its a problem. Suspect bad igniton switch.
Old 01-15-2007 | 09:23 PM
  #4  
rabbitman's Avatar
GTcars - Post God !
iTrader: (3)
 
Joined: May 2005
Posts: 4,367
From: Kitchener
Rep Power: 803
rabbitman is a jewel in the roughrabbitman is a jewel in the roughrabbitman is a jewel in the roughrabbitman is a jewel in the rough
The 90 Jetta may not have had a constant power wire, so someone may have led one in the past, and you've just gotten it switched with the switched. Pretty common, and I've done it before in my Rabbits. Just pull the deck and check the 2 power leads. You've likely just got them switched. The ignition switched in those cars are unlikely to go, the newer ones on the other hand... well, I've got a 94, on it's 3rd.
Old 01-18-2007 | 11:57 PM
  #5  
crx_90's Avatar
Thread Starter
~~ Hardcore Newb ~~
iTrader: (1)
 
Joined: Mar 2005
Posts: 142
Rep Power: 719
crx_90 street rep is low. keep going
bumpp
well rite now i have the ignition and the 12 volt to geather so it works for the mean time but its getting annoying to switch on and off the deck plus the antena cable wont go into the deck because its totaly differnet ..gayy.. but yea if ne one knows the ignition cable colour that would helppp
Old 01-19-2007 | 01:23 AM
  #6  
3nidapooh's Avatar
Average GTcars Poster
iTrader: (2)
 
Joined: Feb 2005
Posts: 688
From: Toronto
Rep Power: 734
3nidapooh street rep is low. keep going
To get the antenna to fit properly u need an antenna adapter u can get it at crappy tire or any audioshop for like $10, and as for the deck the same like they said about a wire being constant.

your wiring should be like this in the car:

12v ignition wire-(stock wiring-yellow/redstripe)-(new deck-red)
ground-(black)
12v battery wire-(stock wiring-white/yellow or blue stripe)-(new deck-yellow)
dash light dimmer wire-(orange)
power antenna or remote wire for amp-(stock wiring-brown/white stripe)-(new deck-blue or blue/white stripe)

All the other colors are for speakers, but if your wires are different then someone may have tampered witht he wiring for some reason before.
Old 01-19-2007 | 10:46 AM
  #7  
crx_90's Avatar
Thread Starter
~~ Hardcore Newb ~~
iTrader: (1)
 
Joined: Mar 2005
Posts: 142
Rep Power: 719
crx_90 street rep is low. keep going
thanx man
i never knew about the antena thing
am gonna try too fix it now
thankkss
Old 01-19-2007 | 11:14 AM
  #8  
3nidapooh's Avatar
Average GTcars Poster
iTrader: (2)
 
Joined: Feb 2005
Posts: 688
From: Toronto
Rep Power: 734
3nidapooh street rep is low. keep going
no prob
Old 01-29-2007 | 10:54 AM
  #9  
JDMWHACK's Avatar
~~ Hardcore Newb ~~
 
Joined: Jan 2007
Posts: 40
From: Barrie
Rep Power: 652
JDMWHACK street rep is low. keep going
i had the same problem.... ignition wire must be mixed up

or Ilumination wire as they call it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
firefly_2k3
Car Audio & Electronics
21
01-06-2009 12:31 AM
MP
Hyundai Mailing List
1
02-07-2007 01:25 AM
dylman
Hyundai Mailing List
2
02-01-2007 11:25 PM
B Crawford
Hyundai Mailing List
2
12-22-2006 09:51 PM
jefferypuffenbarger@gmail.com
Hyundai Mailing List
2
12-22-2006 03:53 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 06:54 AM.

Page generated in 0.09173 seconds with 7 queries