Rep Power: 650

So I got a double din in dash DVD touchscreen HU; one of those cheap Chinese ones, Roadview RDM-5. Not a bad buy for $150.

So I wired the harness and plugged it in. The weird thing is that the radio is working fine but I cant get the audio from the CD/DVD. Any ideas?

Also I wasn't getting any video with the CD/DVD until I grounded the "Park In" wire coming out of the HU harness, not sure whats that about. This is my first ever time wiring a HU and installing it. Thanks

 
Rep Power: 664

Im not sure about the audio but i would check all your wiring and connections.

The reason why you have to ground the park brake wire is so that you can have it on well you are driving otherwise the e brake has to be engaged to watch it>

 
Rep Power: 639

while i was installling my friends system on a ford explorer.. i noticed that there was a stock factory ampilier. SO after i foud out that there was no audio was fiddling around for an hoour finally juss decided to run my own speaker wire.. So most likely there mite b a factory amp.. wat kind of car is it?

 
Rep Power: 0

If your car has a factory amp or an after market amp. then you have connected the wrong turn on. Rec-connect the amp turn on to amp not radio.

I hope this helps, if not come by the shop and I can take a look at it.

Hitech Audio Video
905 458-6828
1625 Steeles Ave East
Brampton, Ontario

 
Rep Power: 650

Thanks for the help, I figured that out already. Just waiting for my PAC-OEM line out converter to arrive so that I can hook it up in line without bypassing the amp.

 
Rep Power: 0

i bought the same one
Roadview RDM-5

it works just fine but.
How do i make the GPS work? the navigation?